/**
 @page PWRCU_PowerDown_WAKEUPPin

 @verbatim
 * @file    PWRCU/PowerDown_WAKEUPPin/readme.txt
 * @version V1.00
 * @date    2019-05-31
 * @brief   Description of PWRCU PowerDown_WAKEUPPin example.
 @endverbatim

@par Example Description:

This example describes how to configure the WAKEUP pin to wake up the system from the Power Down mode.
LEDs off means the chip is in Power Down mode.

@par Directory Contents:

- PWRCU/PowerDown_WAKEUPPin/main.c               Main program
- PWRCU/PowerDown_WAKEUPPin/ht32fxxxx_it.c       Interrupt handlers

@par Hardware and Software Environment:

- LEDs are used as the sign to indicate if the system is in the Power Down mode.
- This example can be run on HT32 Series development board.

@par Firmware Disclaimer Information

1. The customer hereby acknowledges and agrees that the program technical documentation, including the
   code, which is supplied by Holtek Semiconductor Inc., (hereinafter referred to as "HOLTEK") is the
   proprietary and confidential intellectual property of HOLTEK, and is protected by copyright law and
   other intellectual property laws.

2. The customer hereby acknowledges and agrees that the program technical documentation, including the
   code, is confidential information belonging to HOLTEK, and must not be disclosed to any third parties
   other than HOLTEK and the customer.

3. The program technical documentation, including the code, is provided "as is" and for customer reference
   only. After delivery by HOLTEK, the customer shall use the program technical documentation, including
   the code, at their own risk. HOLTEK disclaims any expressed, implied or statutory warranties, including
   the warranties of merchantability, satisfactory quality and fitness for a particular purpose.

 * <h2><center>Copyright (C) Holtek Semiconductor Inc. All rights reserved</center></h2>
 */
